MODBIT 25/55-60 CR
General information
Rubber binders can be applied to replace standard modified bitumens after the verification of the technical specifications and of all the properties of a mineral-asphalt mixture according to a model recipe required under domestic regulations.
Basic bitumen with rubber addition applied in the binder MODBIT 25/55-60 CR extends the viscosity scope of the asphalt. The effect is visible mostly in functional property tests, where the parameters of a mineral-asphalt mixture after ageing and at low temperatures are more favourable than in a mixture made of road bitumen and PMB. It complies with PN-EN 14023:2011/Ap1:2014-04.
Specification
Parametres | Unit | Value | Class | Test method |
Penetration at 25°C | 1/10 mm | 45-80 | 4 | PN-EN 1426 |
Softening point | °C | ≥ 55 | 5 | PN-EN 1427 |
Force ductility (energy of deformation) | J/cm2 | ≥ 3 at 5°C | 6 |
PN-EN 13589 PN-EN 13703 |
Change of mass after ageing | % m/m | ≤ 0,5 | 3 | PN-EN 12607-1 |
Retained penetration at 25°C after ageing | % | ≥ 60 | 7 |
PN-EN 12607-1 PN-EN 1426 |
Increase in softening point after ageing | °C | ≤ 8 | 2 |
PN-EN 12607-1 PN-EN 1427 |
Flashpoint | °C | ≥ 235 | 3 | PN-EN 13398 |
Fraas beaking point | °C | ≤ -12 | 7 | PN-EN 12593 |
Elastic recovery at 25°C | % | ≥ 50 | 5 | PN-EN 13398 |
Plasticity range | °C | TBR | 1 | PN-EN 14023 |
Storage stability - difference in softening point | °C | ≤ 5 | 2 |
PN-EN 13398 PN-EN 1427 |
Elastic recovery at 25°C after ageing | % | ≥ 50 | 4 |
PN-EN 12607-1 PN-EN 1427 |
TBR stands for a value given in certificates.